Glowshift - Tinted 7 Color Water Temp Gauge
GlowShift’s Tinted 7 Color Series Water Temperature Gauge allows you to easily monitor your engine's coolant temperature ensuring it does not over heat, causing major engine damage. This water temperature gauge reads from 100° to 300° Fahrenheit with the included 1/8-27 NPT electronic temperature sensor. This gauge features an illuminated red needle that will sweep 270 degrees, and is powered by stepper motor technology ensuring your needle movement is smooth and your gauge readings are extremely accurate. This gauge also features a low profile tinted lens, as well as 7 color through dial lighting. GlowShift’s 7 Color through dial lighting allows you to match your vehicle's factory dash lights or add a custom look to your interior that is second to none. Our 7 color through dial LED lighting system lets the user easily cycle through 7 solid color modes, along with 2 color cycle modes, and for easier night driving the LEDs can be dimmed 30% when connected to your factory headlight switch. With the included color memory recall feature you don’t need to worry about adjusting the color of your gauge every time you turn your vehicle. The included 1/8-27 NPT electronic temperature sensor is easily installed using either a Water Temperature Sensor Adapter or T-fitting Adapter. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.
Note: This gauge includes a 1/8-27 NPT thread size on the sensor and your vehicle may not come equipped with the same thread size. An additional threading adapter may be required for the installation of the sensor. If you are unsure if your application will require additional threading adapters, please contact a GlowShift Technical Support Specialist.
GlowShift's 7 Color Series Extended Wire Harness replaces the included 18" lead wires and effortlessly snaps into the back of your 7 Color Series Gauge using the featured modular connector, giving you 3.5' of power wire and 10' of sensor wire so no additional wire extensions should be needed.
2 1/16" (52mm) Black Face Gauge with a Magnified Tinted Lens
Water Temperature Reading from 100° to 300° Fahrenheit
Electronic Water Temperature Sensor with 1/8-27 NPT Male Threads
7 Color LED Through Dial Lighting with Color Recall Ability
7 Solid Color Settings and Two Color Cycle Modes
Stepper Motor Technology
Dimmer Wire Allows the Gauge to Dim 30%
Gauge Depth Measures 1 5/16"
Free Lifetime Technical Support
One Year Limited Warranty